Drd. ing. Ionela Luminița CĂNUȚĂ (BUCUROIU), Dr. ing. Lucian PĂUNESCU
Rezumat
Lucrarea a vizat fabricarea unei spume geopolimerice pe bază de deșeuri aluminosilicatice din construcții, industria energetică și industria siderurgică. H2O2 ca agent de spumare a fost utilizat într o combinație mai rar folosită cu un stabilizator de spumă (stearatul de calciu). Activatorul alcalin a fost compus din NaOH dizo lvat în apă și K 2 SiO 3 , de asemenea, un amestec mai puțin frecvent folosit. Întărirea spumei s a efectuat, mai întâi, la 70 ℃ pentru 24 ore într un cuptor și apoi la temperatura camerei pentru 7 și respectiv, 28 zile. Rezultatele au fost excelente. S a obse rvat că rezistența mecanică a spumei a crescut rapid în primele 7 zile
Cuvinte cheie: spum ă rigidăgeopolimeractivare alcalinădeșeualuminosilicat
Abstract
The work aimed at the manufacture of a geopolymer foam based on alumina silicate waste f romconstruction, energy and steel industries. H 2 O 2 as a foaming agent was used in a less frequently combination with a foam stabilizer (calcium stearate). The alkaline activator was composed of NaOH water dissolved and
K 2 SiO 3 , also a less frequently used mix. The foam was cured first at 70 ℃ for 24 hours in an electric oven and then at room temperature for 7 and 28 days, respectively. The results were excellent. It was observed that the foam mechanical strength increased rapidly in the first 7 days , values being close to those of the final curing.
Keywords: rigid foamgeopolymeralkaline activationwastealumina silicate.
Din același număr
- MANUFACTURING AND REPAIR TECHNOLOGIES FOR A DRIVE SHAFT
- EDITORIAL Inovația în inginerie, încotro?
- ECO POWER GENERATION SYSTEMS ONBOARD THE SHIP
- MODULAR PNEUMATIC VISE DESIGNED FOR ROBOTIC LINES
- ENERGY POLE OF PERFORMANCE: ARAD ECOSTADIUM 2035
- OPTIMIZATION OF THE WELDING PROCESS IN THE SHIP ASSEMBLY SECTION
- RIVER NAVIGATION OF SEAGOING SHIPS
- USING OCCTOPUS OFFICE FOR A P.S.V. VESSEL
- ELECTRIC VEHICLES AND TYPES OF MOTORS USED. COMPARATIVE ANALYSIS BETWEEN BLDC, PMSM, AND THREE-PHASE ASYNCHRO-NOUS MOTORS
- DESIGN AND QUALIFICATION OF WELDING PROCEDURES FOR A HIGH-PRESSURE SEPARATOR WITH A VOLUME OF 51 M³
- ELECTROMAGNETIC INTERFERENCE (EMI)
- EVOLUTION OF THE IMPLEMENTATION OF RENEWABLE ENERGY SOURCES IN ROMANIA
